LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Air Conditioning) >> Receiver/Dryer Desiccant Replacement

Receiver/Dryer Desiccant Replacement

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Install the receiver/dryer as quickly as possible to prevent the system from absorbing moisture from the air.
  1. Remove the A/C condenser (see A/C CONDENSER REPLACEMENT  ).
  2. Remove the bolts from the A/C condenser, then remove the receiver/dryer (A), the bracket (B), and the O-rings (C).
    Fig 1: Receiver/Dryer, Bracket & O-Rings With Torque Specifications
    G05959858Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the receiver/dryer in the reverse order of removal. Replace the O-rings with new ones, and apply a thin coat of refrigerant oil (SP-10) before installing them. Be sure to use the correct O-rings for HFC-134a (R-134a) to avoid leakage.
scientia non olet · About LEMON Manuals