LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 314 (Starting System - Testing & Troubleshooting) >> Testing >> Engine Start/Stop Switch Test >> Test

Engine Start/Stop Switch Test: Test

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Honda Fit, 2019 Honda Fit, 2018 Honda Fit, 2017 Honda Fit, and 2016 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Heater Control Panel - Remove (Without Climate Control)
  2. Climate Control Unit - Remove (With Climate Control)
  3. Engine Start/Stop Switch - Test
    GHH83270GHH83271Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC.
    GHH83270GHH83271Courtesy of HONDA, U.S.A., INC.HONDA, U.S.A., INC.
    		 1. Check the engine start/stop switch (A) according to the table.

    NOTE: 

    • When an LED is located between terminals, check if the LED illuminates by connecting power and ground to the LED.
    • Note this important operating characteristic; diode bias causes a diode to fully conduct electricity in one direction (forward), while not at all in the opposite direction (reverse).

    2. If the result is not as specified, replace the engine start/stop switch .
  4. All Removed Parts - Install
      1. Install the parts in the reverse order of removal.
scientia non olet · About LEMON Manuals