LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2014 >> Fit >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (Charging System) >> Alternator Removal and Installation >> Installation

Alternator Removal and Installation: Installation

WARNING: This page is about a different car, the 2013 Honda Fit, 2012 Honda Fit, 2011 Honda Fit, 2010 Honda Fit, and 2009 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the alternator.
    Fig 1: Alternator & Bolts With Torque Specifications
    G05952319Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Connect the alternator connector (A) and BLK wire (B), then install the harness clamp (C) to the alternator.
    Fig 2: Alternator Connector, BLK Wire & Harness Clamp With Torque Specifications
    G05952320Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the intake manifold (see INSTALLATION ).
  4. Install the drive belt (see DRIVE BELT REMOVAL/INSTALLATION  ).
  5. Do the battery terminal reconnection procedure (see BATTERY TERMINAL DISCONNECTION AND RECONNECTION ).
scientia non olet · About LEMON Manuals