Key Interlock Solenoid Test (Without Keyless Access System): Test

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2020 Honda Fit, 2019 Honda Fit, 2018 Honda Fit, 2017 Honda Fit, and 2016 Honda Fit. However, it is still accessible from the selected car via links, so may be relevant.

SRS components are located in this area. Review the SRS component locations and the SRS precautions and procedures before doing repairs or service.

Column Cover - Remove

Key Interlock Solenoid - Test

Courtesy of HONDA, U.S.A., INC.

1. Turn the ignition switch to LOCK (0).

2. Disconnect the connector (A).

3. Turn the ignition switch to ACCESSORY (I).

4. Check the solenoid operation by connecting power and ground according to the table.

NOTE: To prevent damage to the actuator, apply battery voltage only momentarily.

5. If the key interlock solenoid does not work properly, the key interlock solenoid is faulty; replace the steering lock (B).

Courtesy of HONDA, U.S.A., INC.

All Removed Parts - Install

1. Install the parts in the reverse order of removal.