Navigation cannot control XM radio
WARNING: This page is about a different variant/trim than selected.
NOTE:
- Check the vehicle battery condition first (see BATTERY TEST ).
- Make sure that the correct navigation DVD color and version are installed.
- Check any official Honda service website for more service information about the navigation system.
- Start the vehicle.
- Make sure the anti-theft code for the audio system is entered.
- Go into the System Diagnostic Mode, and select the Self-Diagnosis Mode (see SYSTEM DIAGNOSTIC MODE ).
- Check the System Links.
Is the XM icon red?
YES -Go to step 5.
NO -Go to step 8.
- Clear the hard error code (see HOW TO CLEAR ERROR HISTORY ).
- Turn the ignition switch to LOCK (0) and then back to ON (II).
- Check for the hard error code (see HOW TO CHECK ERROR HISTORY (NAVIGATION DTCS)
).
Are there any hard error code stored?
YES -Refer to the hard error code troubleshooting HOW TO CHECK ERROR HISTORY (NAVIGATION DTCS) .
NO -Go to step 8.
- Turn the ignition switch to LOCK (0).
- Substitute a known-good navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION
).
Can the navigation system control XM radio?
YES -Replace the original navigation unit (see NAVIGATION UNIT REMOVAL/INSTALLATION ).
NO -Replace the XM receiver (see XM RECEIVER REMOVAL/INSTALLATION ).