Transfer Hypoid Drive Gear Bearing Replacement

Special Tools Required 

• Driver 07749-0010000
• Attachment, 42 x 47 mm 07746-0010300
• Attachment, 40 x 50 mm 07LAD-PW50601

1. Remove the tapered roller bearing (A) from the transfer hypoid drive gear (B) with the driver, attachment (42 x 47 mm), the bearing separator (C) and the press.
   Fig 1: Removing Tapered Roller Bearing

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
2. Install a new bearing on the transfer hypoid drive gear with the driver, attachment (42 x 47 mm), attachment (40 x 50 mm), and the press.
   Fig 2: Installing Bearing Onto Transfer Hypoid Drive Gear

   Courtesy of AMERICAN HONDA MOTOR CO., INC.