LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Ridgeline RTL >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (EVAP System) >> EVAP Canister Replacement

EVAP Canister Replacement

WARNING: This page is about a different car, the 2008 Honda Pilot, 2007 Honda Pilot, and 2006 Honda Pilot. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the EVAP canister cover (A).
    Fig 1: Removing EVAP Canister Cover With Torque Specifications
    G04245597Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the hoses (A), the FTP sensor 3P connector (B), and EVAP canister vent shut valve 2P connector (C).
    Fig 2: Removing Hoses, FTP Sensor 3P Connector And EVAP Canister Vent Shut Valve 2P Connector With Torque Specifications
    G04245598Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the bolts (D).
  4. Remove the EVAP canister assembly (E).
  5. Remove the EVAP canister bracket (A).
    NOTE: The canister filter remains on the bracket.
    Fig 3: Removing EVAP Canister Bracket With Torque Specifications
    G04245599Courtesy of AMERICAN HONDA MOTOR CO., INC.
  6. Install the canister in the reverse order of removal.
scientia non olet · About LEMON Manuals