Center Console Disassembly/Reassembly

Special Tools Required 

KTC trim tool set SOJATP2014 *

* Available through the American Honda Tool and Equipment Program; call 888-424-6857

1. Remove the center console (see CENTER CONSOLE REMOVAL/INSTALLATION  ).
2. Remove the console armrest (see CONSOLE ARMREST REMOVAL/INSTALLATION  ).
3. While pushing the beverage holder lever (A), slide the beverage holder (B) forward, and disengage the beverage holder stops (C) to remove the beverage holder.
   Fig 1: Sliding Beverage Holder Forward

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
4. Release the console lid (A).
   Fig 2: Releasing Console Lid

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
5. Using a T20 Torx bit, remove the screws, then separate the console (A) and console frame (B).
   Fig 3: Separating Console And Console Frame

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
6. Using a T20 Torx bit, remove the screws, then separate the console box (A) and the console frame (B). Disconnect the light bulb socket (C), and detach the connector clip (D), then remove the light (E) from the console box.
   Fig 4: Identifying Console Box And Console Frame

   Courtesy of AMERICAN HONDA MOTOR CO., INC.
7. Remove the console lid bumpers (F). Release the hooks (G), then remove the console lid guides (H) from the console frame.
8. Reassemble the console in the reverse order of disassembly, and make sure the light bulb socket is plugged in properly.