Power Seat Adjustment Switch Test/Replacement

Remove the power seat adjustment switch knobs and recline cover from the driver's seat, then remove the two screws and the power seat switch (see FRONT SEAT DISASSEMBLY/REASSEMBLY - 8-WAY POWER ).
Disconnect the 6P connectors from the power seat adjustment switch (A).

Fig 1: Identifying 6P Connectors Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Reinstall the adjustment switch knobs to the switch.
Check for continuity between the terminals in each switch position according to the table.

Fig 2: Identifying Power Seat Adjustment Switch Positions
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If the continuity is not as specified, replace the switch.