LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Element SC, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Oil Seal Replacement

Oil Seal Replacement

WARNING: This page is about a different variant/trim than selected.

Special Tools Required 

NOTE: The illustration shows the 4WD transmission; the 2WD transmission is similar.
  1. Remove the oil seal from the transmission housing.
    Fig 1: Removing Oil Seal From Transmission Housing
    G06267268Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the oil seal from the torque converter housing.
    Fig 2: Removing Oil Seal From Torque Converter Housing
    G06267269Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install a new oil seal (A) flush with the transmission housing using the driver and the oil seal driver attachment.
    Fig 3: Installing Oil Seal Flush With Transmission Housing
    G06267270Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install a new oil seal (A) flush with the torque converter housing using the driver and the oil seal driver attachment.
Fig 4: Installing Oil Seal Flush With Torque Converter Housing
G06267271Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals