Washer Motor Test
- Remove the right inner fender (see FRONT INNER FENDER REPLACEMENT
).
- Disconnect the 2P connectors (A) from the washer motors.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Test the motor by connecting battery power to the No. 1 terminal and ground the No. 2 terminal of the washer motor. The motor should run.
- If the motor does not run or fails to run smoothly, replace it.
- If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged pump outlet in the motor.