Audio Remote Switch Replacement

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, 2006 Honda S2000, and 2005 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
Disconnect the 6P connector (A) from the audio remote switch.

Fig 1: Identifying 6P Connector, Mounting Screws And Engine Start Switch
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the three mounting screws (B), and pull out the engine start switch (C).
If necessary, replace the bulb(s) (D).
Install the audio remote switch in the reverse order of removal.