LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2006 >> Civic Si >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Immobilizer System) >> Immobilizer Control Unit-Receiver Replacement >> '06-09 model

'06-09 model

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2009 Honda S2000, 2008 Honda S2000, 2007 Honda S2000, 2006 Honda S2000, and 2005 Honda S2000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the steering column covers (see STEERING COLUMN REMOVAL AND INSTALLATION ).
  2. Disconnect the 7P connector (A) from the immobilizer control unit-receiver (B).
    Fig 1: Disconnecting 7P Connector From Immobilizer Control Unit-Receiver
    G03695092Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the 7P connector (C) from the ignition key switch.
  4. Remove the four screws, and remove the immobilizer control unit-receiver from the ignition key cylinder.
  5. Install in the reverse order of removal.
  6. After replacement, make sure the immobilizer indicator blinks correctly.
scientia non olet · About LEMON Manuals