LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2002 >> Insight Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (3.5L V6 Engine) >> Engine Block >> Piston, Pin, and Connecting Rod Replacement >> Reassembly

Piston, Pin, and Connecting Rod Replacement: Reassembly

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Honda Odyssey, 2003 Honda Odyssey, 2002 Honda Odyssey, 2001 Honda Odyssey, and 2000 Honda Odyssey. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a piston pin snap ring (A).
    Fig 1: Installing Piston Pin Snap Ring
    G01505272Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Coat the piston pin bore in the piston, the bore in the connecting rod, and the piston pin with new engine oil.
  3. Heat the piston to about 158°F(70°C).
    Fig 2: Heating Piston
    G01505273Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the piston pin (A). Assemble the piston (B) and connecting rod (C) with the embossed marks (D) on the same side.
    Fig 3: Installing Piston Pin
    G01505274Courtesy of AMERICAN HONDA MOTOR CO., INC.
  5. Install the remaining snap ring.
scientia non olet · About LEMON Manuals