LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> Prelude Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Supplemental Inflatable Restraint System) >> Diagnostics >> Erasing Diagnostic Trouble Code Memory >> Erasing DTC Memory Using Honda PGM Tester

Erasing DTC Memory Using Honda PGM Tester

WARNING: This page is about a different car, the 2000 Honda Accord. However, it is still accessible from the selected car via links, so may be relevant.

Connect Honda PGM Tester to 16-pin data link connector and follow tester prompts to erase DTC. See Figure .

NOTE: DO NOT use a jumper wire in place of SCS service connector. Jumper wire may be difficult to connect and disconnect quickly enough.