LEMON Manuals: Even more car manuals for everyone
Home >> Genesis >> 2019 >> G90 5.0 Ultimate, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Stability Control Diagnosis >> DTC C1702-04: ABS ESP ESC Control Module Variant Coding >> DTC Inspection >> GDS Data Analysis >> Variant Code Reset

Variant Code Reset

  1. Check for improper installation of ECM/TCM/ESC/4WD/DCT/ACU/EPB ECU.
  2. Check for wrong 4WD ECU installation.
  3. Check for wrong G sensor installation.
  4. Check for wrong DCT ECU installation.
  5. Check for wrong TCM installation.
  6. Check for wrong EPB ECU installation.
  7. Connect GDS to Data Link Connector (DLC).
  8. Ignition switch 'ON'.
  9. Perform variant code reset in Vehicle S/W Management menu of the GDS.
  10. Ignition switch 'OFF' and wait for about 10 seconds, and then ignition switch 'ON'. Go to "COMPONENT INSPECTION " procedure.
scientia non olet · About LEMON Manuals