Removal Procedure

Remove the left front tire and wheel assembly. Tire and Wheel Removal and Installation (Aluminum Wheel)
Courtesy of GENERAL MOTORS COMPANY

{If equipped} Front Tire Front Air Deflector Bolt (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Quantity of fasteners may vary based on option content.

Front Wheelhouse Liner Bolt (1) - Remove [ 3x ]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Quantity of fasteners may vary based on option content.

Front Wheelhouse Liner Bolt (1) - Remove [ 3x ]
Front Wheelhouse Liner Retainer (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Wheelhouse Liner (1) - Reposition
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Place a drain pan under the vehicle.
Using two flat-bladed tools, place the blades under each side of the windshield washer solvent container level sensor (1).
Twist the two flat-bladed tools in opposite directions to lift and disengage the windshield washer solvent container level sensor (1) from the windshield washer solvent container level sensor grommet (2).
Carefully squeeze the windshield washer solvent container level sensor grommet (2) while using a flat-bladed tool to pry outward under the edge of the grommet.