LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2018 >> Canyon SLT, 2.8L Eng VIN 1, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.8L (LWN) Diesel - Repair Instructions >> Repair Instructions >> Fuel Injector Flow Rate Programming >> Injector Flow Rate Programming

Injector Flow Rate Programming

  1. Ignition OFF.
  2. Record all the injection quantity adjustment codes from the corresponding cylinder from each injector that is being replaced or from all injectors if the ECM was replaced.
  3. Ignition ON.
    4. NOTE:

    Enter the injection quantity adjustment code from the injector or injectors that is printed on the top.

  4. Perform the scan tool Injector Flow Rate Programming and follow the instructions on the screen.
  5. If any DTCs are set, refer to Diagnostic Trouble Code (DTC) List - Vehicle .
scientia non olet · About LEMON Manuals