Fastener Specifications
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Lower Control Arm Ball Stud Nut Cotter Pin | |
| Front Lower Control Arm Front Bolt | |
| Front Lower Control Arm Front Nut | |
|
100 N.m (74 lb ft) |
|
Loosen One to Two Revolutions |
|
115 N.m (85 lb ft) |
|
90 - 105 degrees |
| Front Lower Control Arm Rear Bolt | |
| Front Lower Control Arm Rear Nut | 70 N.m (52 lb ft) |
| Wheel Stud | |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Front Brake Hose Bracket Bolt | 15 N.m (11 lb ft) |
| Front Lower Control Arm Ball Joint Bolt/Nut | 68 N.m (50 lb ft) |
| Front Lower Control Arm Ball Stud Nut | |
|
10 N.m (89 lb in) |
|
155 - 175 degrees |
| Front Lower Control Arm Bushing Nut - Rear | 150 N.m (111 lb ft) |
| Front Stabilizer Shaft Insulator Clamp Bolt | 50 N.m (37 lb ft) |
| Front Stabilizer Shaft Link Nut- Lower | 75 N.m (55 lb ft) |
| Front Stabilizer Shaft Link Nut- Upper | 85 N.m (63 lb ft) |
| Front Suspension Strut Mount Bolt | 25 N.m (18 lb ft) |
| Front Suspension Strut Nut@Front Suspension Strut Mount | 55 N.m (41 lb ft) |
| Front Suspension Strut Nut@Steering Knuckle | 185 N.m (137 lb ft) |
| Front Wheel Bearing and Hub Assembly Bolt | 100 N.m (74 lb ft) |