LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2012 >> Canyon 4D Pickup, 2.9L Eng VIN 9 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 2.9L - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Install a new O-ring seal to the CMP sensor.
  2. Lightly lubricate the O-ring seal with clean engine oil.
    3. Fig 1: View Of Exhaust Camshaft Sensor
    GM858172Courtesy of GENERAL MOTORS COMPANY
  3. Install the CMP sensor into the cylinder head.
    4. CAUTION:

    Refer to Fastener Caution .

  4. Install the CMP sensor bolt.

    Tighten 

    Tighten the camshaft position (CMP) sensor bolt to 10 N.m (89 lb in).

    5. Fig 2: View Of CMP Sensor Connector, Exhaust Camshaft Actuator Connector & Engine Wiring Harness Retainer
    GM1350714Courtesy of GENERAL MOTORS COMPANY
  5. Connect the engine wiring harness electrical connector (4) to the CMP sensor (5).
scientia non olet · About LEMON Manuals