LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2011 >> Canyon 4D Pickup, 5.3 P, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 5.3L - Repair Instructions >> Repair Instructions >> Air Cleaner Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Integral Air Cleaner Housing Bolts
    GM1899698Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner housing (1) to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the integral air cleaner housing bolts (2) to 15 N.m (11 lb ft).
    3. Fig 2: MAF Sensor/IAT Sensor
    GM1897141Courtesy of GENERAL MOTORS CORP.
  3. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.
  4. Install the air cleaner outlet duct to the air cleaner. Refer to Air Cleaner Resonator Outlet Duct Replacement .
scientia non olet · About LEMON Manuals