LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2005 >> Jimmy Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Transfer Case - NVG 236-NP8) >> Repair Instructions >> Transfer Case Motor/Encoder Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Transfer Case Shield
    GM707039Courtesy of GENERAL MOTORS CORP.
  1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the transfer case shield from the vehicle. Refer to Transfer Case Shield Replacement .
    3. Fig 2: View Of Motor/Encoder Electrical Connector
    GM662851Courtesy of GENERAL MOTORS CORP.
  3. Remove the motor/encoder electrical connector.
    4. Fig 3: Identifying Actuator Encoder Motor Mounting Bolts
    GM662850Courtesy of GENERAL MOTORS CORP.
  4. Remove the motor/encoder mounting bolts.
  5. Remove the motor/encoder assembly.
  6. Remove the motor/encoder gasket.
scientia non olet · About LEMON Manuals