LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Repair Instructions >> Retaining Plate Replacement -Rocker Panel (Blazer) >> Tools Required >> Removal Procedure

Removal Procedure

  1. Raise the vehicle. Refer to LIFTING AND JACKING THE VEHICLE in General Information.
  2. Remove the front fender lower cladding.
  3. Remove the rocker panel molding. Refer to MOLDING REPLACEMENT - ROCKER PANEL (XTREME)  or MOLDING REPLACEMENT - ROCKER PANEL (BLAZER)  or MOLDING REPLACEMENT - ROCKER PANEL (JIMMY) .
  4. Drill out the rivets using a inch drill bit.
  5. Remove the retaining plate.
    Fig 1: Rocker Molding
    G01477386Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals