LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (HVAC Systems - Automatic) >> Repair Instructions >> Blower Motor Control Processor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connectors For Blower Motor Control Processor
    GM759902Courtesy of GENERAL MOTORS CORP.
  1. Install the blower motor control processor (1).
    2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the blower motor control processor mounting screws (2).

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  3. Connect the electrical connector (3) to the blower motor control processor (1).
  4. Connect the electrical connector to the blower motor.
  5. Install the right closeout panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - RIGHT in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals