LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2000 >> Envoy >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System - 4WAL >> Diagnosis & Testing >> Diagnostic System Check

Diagnostic System Check

NOTE: For circuit reference, see WIRING DIAGRAMS .
  1. Install scan tool. If scan tool powers up, go to next step. If scan tool does not power up, diagnose data link communications. See DATA LINK CONNECTORS article in WIRING DIAGRAMS.
  2. Turn ignition on. Using scan tool, attempt to establish communication with EBCM, VCM, instrument panel cluster and BCM. If scan tool communicates with all of the control modules, go to next step. If scan tool does not communicate with any of the control modules, go to TEST C: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYMPTOM DIAGNOSIS .
  3. Using scan tool, display DTCs for EBCM, VCM and instrument panel cluster. If scan tool displays any related DTCs, go to next step. If scan tool does not display any related DTCs, see SYMPTOM DIAGNOSIS .
  4. If scan tool displays any "U" type DTC, go to TEST C: SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE  under SYMPTOM DIAGNOSIS . If any other DTCs are set, go to next step.
  5. If scan tool displays DTC P0500, P0502, P0503, P0562, P0563 or P0601, diagnose affected DTC(s). Go to appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE.
scientia non olet · About LEMON Manuals