LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 1998 >> Jimmy 4D Utility, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Anti-Lock Brake System) >> Removal & Installation >> Electronic Brake Control Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1997 Oldsmobile Bravada, 1997 GMC Sonoma, 1997 GMC Jimmy, 1997 Chevrolet S10 Pickup, and 1997 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect negative battery terminal. Disconnect harness connector from EBCM and combination valve. Remove 4 module retaining screws.
  2. To install, reverse removal procedure. DO NOT use RTV or any other type of sealant on EBCM gasket or mating surfaces.
scientia non olet · About LEMON Manuals