Side Obstacle Detection Control Module: Removal
WARNING: This page is about a different car, the 2020 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
For information on Ford Color Coded Illustrations refer to OEM Color Coding
Side obstacle detection control module
NOTE:
LH side is shown, RH side is similar.
NOTE:
This step is only necessary if the SODL or SODR is being replaced.
- Using a diagnostic scan tool, begin the PMI process for the SODL or SODR following the on-screen instructions.
- Disconnect the electrical connector, remove the screws and the SODL or SODR.
Side obstacle detection control module bracket
- Disconnect the electrical connector, release the clips and remove the side obstacle control module bracket.