LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2015 >> Police Interceptor Utility 3.5L Eng VIN T >> Repair and Diagnosis >> Body & Frame >> Seats >> Seating System - 1ST Row >> Removal And Installation >> Driver Seat Module (DSM) >> Installation

Driver Seat Module (DSM): Installation

  1. 1.

    Connect the DSM electrical connectors.

  1. 2.

    Position the DSM and install the 2 screws.

  1. 3.

    NOTE: This step is necessary only if the DSM is being replaced.

    PMI is required when installing a new DSM. Refer to the scan tool instructions to carry out PMI.

scientia non olet · About LEMON Manuals