Module Communications Network -- Hybrid

• Description And Operation
  • Communications Network - Overview
    • Overview
  • Communications Network - 2.0L Duratec - Hybrid (96kW/130PS) - System Operation and Component Description
    • System Operation
      • System Diagram
      • Network Termination
      • Gateway Module
      • High Speed Controller Area Network 1 and 2 (HS1-CAN, HS2-CAN)
      • High Speed Controller Area Network 3 (HS3-CAN)
      • Medium Speed Controller Area Network (MS-CAN)
      • Controller Area Network (CAN) Fault Tolerance
      • Fault Tolerance Normal Operation
      • CAN Circuits Shorted Together
      • CAN (+) Circuit Shorted to Ground
      • CAN (-) Circuit Shorted to Ground
      • CAN (+) Circuit Shorted to Battery Voltage
      • CAN (-) Circuit Shorted to Battery Voltage
      • CAN Circuit Signal Corruption
      • Controller Area Network (CAN) Multiplex Messages - HEV and PHEV
• Diagnosis And Testing
  • Communications Network - 2.0L Duratec - Hybrid (96kW/130PS)
    • DTC Chart: Gateway Module (GWM)
    • Symptom Chart(s)
      • Symptom Chart: Communication Network
    • Pinpoint Tests
      • Pinpoint Test A: The Powertrain Control Module (Pcm) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Pinpoint Test A: The Powertrain Control Module (Pcm) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test B: The Secondary On-Board Diagnostic Control Module C (SOBDMC)/Transmission Control Module (TCM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test B: The Secondary On-Board Diagnostic Control Module C (SOBDMC)/Transmission Control Module (TCM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test C: The Anti-Lock Brake System (Abs) Module Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test C: The Anti-Lock Brake System (Abs) Module Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test D: The Restraints Control Module (RCM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test D: The Restraints Control Module (RCM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test E: The Occupant Classification System Module (OCSM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test E: The Occupant Classification System Module (OCSM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test F: The SCCM (Steering Column Control Module) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test F: The SCCM (Steering Column Control Module) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test G: The Instrument Panel Cluster (IPC) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test G: The Instrument Panel Cluster (IPC) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test H: The Body Control Module (BCM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Causes
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test H: The Body Control Module (BCM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test I: The FCIM (Front Controls Interface Module) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test I: The FCIM (Front Controls Interface Module) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test J: The Audio Front Control Module (ACM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test J: The Audio Front Control Module (ACM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test K: The Image Processing Module A (IPMA) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test K: The Image Processing Module A (IPMA) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test L: The Global Positioning System Module (GPSM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test L: The Global Positioning System Module (GPSM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test M: The FCDIM (Front Control/Display Interface Module) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test M: The FCDIM (Front Control/Display Interface Module) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test N: The Accessory Protocol Interface Module (APIM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test N: The Accessory Protocol Interface Module (APIM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test O: The DSP (Audio Digital Signal Processing Module) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test O: The DSP (Audio Digital Signal Processing Module) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test P: The Digital Audio Control Module C (DACMC) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test P: The Digital Audio Control Module C (DACMC) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Q: The Radio Transceiver Module (RTM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Q: The Radio Transceiver Module (RTM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test R: The Power Steering Control Module (PSCM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test R: The Power Steering Control Module (PSCM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test S: The Driver Seat Module (DSM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test S: The Driver Seat Module (DSM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test T: The Driver Door Module (DDM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test T: The Driver Door Module (DDM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test U: The Passenger Door Module (PDM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test U: The Passenger Door Module (PDM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test V: The Side Obstacle Detection Control Module LH (Sod-L) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test V: The Side Obstacle Detection Control Module LH (Sod-L) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test W: The Side Obstacle Detection Control Module RH (Sod-R) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test W: The Side Obstacle Detection Control Module RH (Sod-R) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test X: The Cruise Control Module (CCM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test X: The Cruise Control Module (CCM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Y: The Head Up Display (HUD) Module Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Y: The Head Up Display (HUD) Module Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Z: The HSWM (Heated Steering Wheel Module) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Z: The HSWM (Heated Steering Wheel Module) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Aa: The SCME (Front Seat Climate Control Module) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Aa: The SCME (Front Seat Climate Control Module) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Ab: The TELEMATIC Control Unit (TCU) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Ab: The TELEMATIC Control Unit (TCU) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Ac: The Battery Energy Control Module (BECM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Ac: The Battery Energy Control Module (BECM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Ad: The Secondary On-Board Diagnostic Control Module A (SOBDM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Ad: The Secondary On-Board Diagnostic Control Module A (SOBDM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test AE: The ACCM (Air Conditioning Control Module) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test AE: The ACCM (Air Conditioning Control Module) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test AF: The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test AF: The Direct Current/Direct Current (Dc/Dc) Converter Control Module Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Ag: The Generic Function Module (GFM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Ag: The Generic Function Module (GFM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Ah: The Gateway Module (GWM) Does Not Respond To The Diagnostic Scan Tool
        • Notes
        • Normal Operation and Fault Conditions
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Ah: The Gateway Module (GWM) Does Not Respond To The Diagnostic Scan Tool
      • Pinpoint Test Ai: No High Speed Controller Area Network 1 (HS1-Can) Communication, All Modules Are Not Responding
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Pinpoint Test Ai: No High Speed Controller Area Network 1 (HS1-Can) Communication, All Modules Are Not Responding
      • Pinpoint Test AJ: No High Speed Controller Area Network 2 (HS2-Can) Communication, All Modules Are Not Responding
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Pinpoint Test AJ: No High Speed Controller Area Network 2 (HS2-Can) Communication, All Modules Are Not Responding
      • Pinpoint Test AK: No High Speed Controller Area Network 3 (HS3-Can) Communication, All Modules Are Not Responding
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Pinpoint Test AK: No High Speed Controller Area Network 3 (HS3-Can) Communication, All Modules Are Not Responding
      • Pinpoint Test Al: No Medium Speed Controller Area Network (Ms-Can) Communication, All Modules Are Not Responding
        • Notes
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Pinpoint Test Al: No Medium Speed Controller Area Network (Ms-Can) Communication, All Modules Are Not Responding
      • Pinpoint Test Am: No Power To The Data Link Connector (DLC)
        • Normal Operation and Fault Conditions
        • Possible Sources
        • Visual Inspection and Diagnostic Pre-checks
        • Pinpoint Test Am: No Power To The Data Link Connector (DLC)
• General Procedures
  • No Communication Between the Integrated Diagnostic System (IDS) and the Vehicle
    • Configuration
• Removal And Installation
  • Gateway Module A (GWM)
    • Removal
    • Installation