Suspension System - General Information: Specifications
ALIGNMENT SPECIFICATIONS
| Item | LH | RH | Total/ Split |
|---|---|---|---|
| Front - Crown Victoria/Grand Marquis (Air Suspension) | |||
| Camber | -0.40° ±0.75° | -0.40° ±0.75° | 0°± 0.75° |
| Caster | 6.2°± 0.75° | 6.4°± 0.75° | -0.20°± 0.75° |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | - | - | -0.15° ± 0.20° |
| Front - Crown Victoria/Grand Marquis (Base)/Coil Spring Rear | |||
| Camber | -0.40° ±0.75° | -0.40° ±0.75° | 0°± 0.75° |
| Caster | 5.9°± 0.75° | 6.1°± 0.75° | -0.20°± 0.75° |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | - | - | -0.15° ± 0.20° |
| Front - Crown Victoria/Grand Marquis (Police/Taxi/Fleet) | |||
| Camber | -0.40° ±0.75° | -0.40° ±0.75° | 0°± 0.75° |
| Caster | 5.7° ±0.75° | 5.9° ±0.75° | -0.20°± 0.75° |
| Toe @ curb ride height (positive value is toe in, negative value is toe out) | - | - | -0.15° ± 0.20° |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Ball Joint Deflection | |
| Lower | 0-0.4 mm (0-0.016 in) |
| Upper | 0-0.2 mm (0-0.008 in) |
| Front Ride Height | |
| Front (base) | 66 mm (2.59 in) ± 10.0 mm (0.39 in) |
| Rear Ride Height | |
| Base (coil) | 124.0 mm (4.88 in) ± 10.0 mm (0.39 in) |
| Non Police-Fleet (coil) | 133.0 mm (5.23 in) ± 10.0 mm (0.39 in) |
| Police (coil) | 145.0 mm (5.7 in) ± 10.0 mm (0.39 in) |
| Rear (Air) | 118.0 mm (4.64 in) ± 10.0 mm (0.39 in) |
| Vehicle Lean (Side-to-Side Differences) | |
| Front wheel opening - maximum | 12.7 mm (0.5 in) |
| Rear wheel opening - maximum | 12.7 mm (0.5 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft |
|---|---|---|
| Cam bolt nuts | 238 | 176 |
| Rearward lower arm bushing-to-lower arm nut | 175 | 128 |
| Tie-rod jam nut | 55 | 41 |