Instrument Cluster And Panel Illumination DTCS

SMART JUNCTION BOX (SJB) DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC	Description	Action
B106E	Solid State Driver Disabled Due to Short Circuit	The module has temporarily disabled an output because an excessive current draw exists (such as a short to ground) that has exceeded the limits that the Smart Junction Box (SJB) can withstand. The cause of the excessive current draw MUST be corrected before a new SJB is installed. ADDRESS all other DTCs first. After the cause of the concern is corrected, INSTALL a new SJB . REFER to MULTIFUNCTION ELECTRONIC MODULES . TEST the system for normal operation.
B106F	Module Disabled Due to External Fault	The module has permanently disabled an output because an excessive current draw fault (such as a short to ground) has exceeded the limits that the SJB can withstand. The cause of the excessive current draw MUST be corrected before a new SJB is installed. ADDRESS all other DTCs first. After the cause of the concern is corrected, INSTALL a new SJB . REFER to MULTIFUNCTION ELECTRONIC MODULES . TEST the system for normal operation.
B213A	Digital Dimmer Switch Input Circuit Failure	Go To PINPOINT TEST A .
B29B8	White Lighting Output Circuit Short to Ground	DIAGNOSE all other DTCs and symptoms first. If no other DTCs or symptoms are present, INSPECT the SJB and C2280b for loose, bent pins or corroded connections. If no concerns are found, INSTALL a new SJB. REFER to MULTIFUNCTION ELECTRONIC MODULES . TEST the system for normal operation.
B2A32	LED Backlighting Output Circuit Open	If the hardwired backlighting components are inoperative, Go To PINPOINT TEST B . If the hardwired backlighting components are always on, Go To PINPOINT TEST C .
B2A33	LED Backlighting Output Circuit Short to Ground	Go To PINPOINT TEST B .
All other DTCs	-	REFER to the Diagnostic Trouble Code (DTC) Chart in MULTIFUNCTION ELECTRONIC MODULES .