LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Edge SEL Plus, FWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Seats >> Seat System >> Removal And Installation >> Memory Set Switch >> Removal And Installation

Removal And Installation

All vehicles 

  1. Remove the driver door trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION .

    2. Edge vehicles 

  2. Disconnect the electrical connector, release the 4 tabs and remove the memory SET switch through the front of the door trim panel.

    3. MKX vehicles 

  3. Disconnect the electrical connector, release the 4 tabs and remove the memory SET switch through the back of the door trim panel.

    4. All vehicles 

  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals