Removal And Installation

WARNING: This page is about a different car, the 2007 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.

Remove the instrument panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
Remove the evaporator core housing. For additional information, refer to Evaporator Core Housing in this article.
Remove the 3 plenum chamber nuts and the plenum chamber.

Fig 1: Locating Plenum Chamber Nuts & Plenum Chamber
Courtesy of FORD MOTOR CO.
- To install, tighten to 4 Nm (35 lb-in).
To install, reverse the removal procedure.