LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Focus LX, 2.0 P, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission-IB5 >> Disassembly And Assembly Of Subassemblies >> Input Shaft >> Assembly

Input Shaft: Assembly

  1. Carefully clean and check all parts and coat with manual transmission fluid before reassembly.
  2. Using a press and a suitable tube, install the bearing (clutch end).
    Fig 1: Installing Bearing (Clutch End)
    G01613310Courtesy of FORD MOTOR CO.
    3. NOTE: The annular groove in the bearing must face outwards.
    Fig 2: Installing Bearing (Transaxle End)
    G01613311Courtesy of FORD MOTOR CO.
  3. Using a press and a suitable tube, install the bearing (transaxle end).
scientia non olet · About LEMON Manuals