LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Explorer 4.0 K, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 277 (Window And Glass) >> Removal And Installation >> Window Control Switch

Window Control Switch

WARNING: This page is about a different car, the 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Left front door shown, all others similar.
    Fig 1: Lifting Front Of Switch Plate From Front Door Trim Panel
    G01609477Courtesy of FORD MOTOR CO.
  1. Lift the front of the switch plate from the front door trim panel and position it aside.
  2. Disconnect the electrical connectors.
    Fig 2: Disconnecting Electrical Connectors
    G01609478Courtesy of FORD MOTOR CO.
  3. Remove the window control switch.
    • Release the four locking tabs.
    Fig 3: Releasing Locking Tabs
    G01609479Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.