LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2003 >> Econoline E250, Van Cargo Extended, 5.4 M >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System-General Information-Natural Gas >> General Procedures >> Spring Lock Couplings >> Disconnect

Spring Lock Couplings: Disconnect

  1. Perform the fuel line venting procedure. Refer to FUEL LINE EVACUATION  .
  2. Remove the fuel tube clip.
    Fig 1: Removing Fuel Tube Clip
    G03462096Courtesy of FORD MOTOR CO.
  3. Install the Spring Lock Coupling Disconnect Tool.
    Fig 2: Installing Spring Lock Coupling Disconnect Tool
    G03462097Courtesy of FORD MOTOR CO.
  4. Close and push the Spring Lock Coupling Disconnect Tool into the open side of the cage.
    Fig 3: Closing & Pushing Disconnect Tool Into Open Side Of Cage
    G03462098Courtesy of FORD MOTOR CO.
  5. Separate the fitting.
    Fig 4: Separating Fitting
    G03462099Courtesy of FORD MOTOR CO.
  6. Remove the Spring Lock Coupling Disconnect Tool.
    Fig 5: Removing Spring Lock Coupling Disconnect Tool
    G03462100Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals