General Specifications
WARNING: This page is about a different variant/trim than selected.
ENGINE - 2.3L GENERAL SPECIFICATIONS
| Item | Specification | |||
|---|---|---|---|---|
| Metal Surface Cleaner F4AZ -19A536-RA | WSE-M5B392-A | |||
| Silicone Gasket & Sealant F7AZ -19554-EA | WSE-M4G323-A4 | |||
| Super Premium SAE 5W-20Engine Oil XO-5W20-QSP | WSS-M2C153-H | |||
| MERPOL® O-Ring Seal Lubricant | ESE-M99B144-B | |||
| Displacement | 2.3L | |||
| No. Of Cylinders | 4 | |||
| Bore/Stroke | 87.5/94.0 | |||
| Firing Order | 1-3-4-2 | |||
| Oil Pressure (Hot @ 2000 RPM) | 29-39 psi 200-268 kPa | |||
| Oil Capacity | 3.5 qts. + 0.5 qt. With Filter | |||
| Cylinder Block | ||||
| Cylinder Bore Diameter | 87.5 -87.53 mm (3.444-3.446 in.) | |||
| Out Of Round | 0.008 mm (0.0003 in.) | |||
| Main Bearing Bore Diameter | 57.020-57.038 mm (2.244-2.245 in.) | |||
| Head Face Flatness | 0.1 mm/General 0.05 mm/200 x 200 (0.003 in./General) (0.0019 in./7.87 x 7.87) | |||
| Piston | ||||
| Diameter (1) | 87.5 -87.51 mm (3.444-3.445 in.) | |||
| Diameter (2) | 87.51-87.52 mm (3.4452-3.4456 in.) | |||
| Diameter (3) | 87.52-87.53 mm (3.445-3.446 in.) | |||
| Piston To Bore Clearance | 0.025-0.045 mm (0.0009-0.0017 in.) | |||
| Ring Groove Width - Top | 1.203-1.205 mm (0.0473-0.0474 in.) | |||
| Ring Groove Width - 2nd | 1.17-1.19 mm (0.0460-0.0468 in.) | |||
| Ring Groove Width - Oil | 2.501-2.503 mm (0.0984-0.0985 in.) | |||
| Piston Skirt Coating Thickness | 0.008-0.020 mm (0.0003-0.0007 in.) | |||
| Piston Pin | ||||
| Diameter | 20.995-21.0 mm (0.8265-0.8267 in.) | |||
| Length | 59.6 -60.4 mm (2.346-2.377 in.) | |||
| Piston To Pin Clearance | 0.008-0.016 mm (0.0003-0.0006 in.) | |||
| Pin To Rod Clearance | Press Fit | |||
| Cylinder Head | ||||
| Exhaust Valve Lift (in @ Zero Lash) | 7.4 mm | |||
| Intake Valve Lift (in @ Zero Lash) | 7.9 mm | |||
| Valve Guide Diameter | 5.509-5.539 mm (0.216-0.218 in.) | |||
| Valve Seat Width - Intake/Exhaust | 0.99-1.84 mm (0.038-0.072 in.) | |||
| Valve Seat Angle | 45 Degrees | |||
| Valve Seat Runout | 0.075 mm (0.0029 in.) | |||
| Valve Lash Adjustor Bore Diameter | 31.00-31.03 mm (1.220-1.221 in.) | |||
| Cam Bore Diameter | 25.015-25.040 mm (0.984-0.985 in.) | |||
| Valve | ||||
| Valve Head Diameter - Intake | 34.85-35.15 mm (1.372-1.383 in.) | |||
| Valve Head Diameter - Exhaust | 29.85-30.15 mm (1.175-1.187 in.) | |||
| Valve Stem Diameter - Intake | 5.470-5.485 mm (0.2153-0.2159 in.) | |||
| Valve Stem Diameter - Exhaust | 5.465-5.480 mm (0.2151-0.2157 in.) | |||
| Valve Stem To Guide Clearance - Intake | 0.0027 mm (0.00010 in.) | |||
| Valve Stem To Guide Clearance - Exhaust | 0.0029 mm (0.00011 in.) | |||
| Valve Face Runout | 0.05 mm (0.0019 in.) | |||
| Valve Face Angle | 45 Degrees | |||
| Valve Spring - Compression Pressure | ||||
| Intake & Exhaust (Installed) | 38.667 lbs. | |||
| Intake (Valve Open) 8.9 mm (0.35 in) Of Lift | 97.032 lbs. | |||
| Exhaust (valve Open) 7.4 mm Of Lift | 93.338 lbs. | |||
| Free Length | 44.92 mm (1.768 in.) | |||
| Assembled Height | 37.9 mm (1.492 in.) | |||
| Crankshaft | ||||
| Main Bearing Journal Diameter | 51.980-52.000 mm (2.046-2.047 in.) | |||
| Production Repair | 51.730-51.750 mm (2.036-2.037 in.) | |||
| Main Bearing Clearance | 0.019-0.035 mm (0.0007-0.0013 in.) | |||
| Connecting Rod Journal Diameter | 49.980-50.000 mm (1.967-1.968 in.) | |||
| Production Repair | 49.730-49.750 mm (1.957-1.958 in.) | |||
| End Play | 0.22-0.43 mm (0.008-0.016 in.) | |||
| Rings | ||||
| Width - Top | 1.17-1.185 mm (0.0460-0.0466 in.) | |||
| Width - 2nd | 1.197-1.199 mm (0.0471-0.0472 in.) | |||
| Width - Oil | 2.38-2.45 mm (0.093-0.096 in.) | |||
| Ring Gap (In Bore) - Top | 0.16-0.31 mm (0.006-0.012 in.) | |||
| Ring Gap (In Bore) - 2nd | 0.33-0.48 mm (0.012-0.018 in.) | |||
| Ring Gap (In Bore) - Oil | 0.2 -0.7 mm (0.007-0.027 in.) | |||
| Valve Tappet | ||||
| Diameter | 30.97-30.98 mm (1.2192-1.2196 in.) | |||
| Tappet To Valve Clearance - Intake | 0.22- 0.28 mm (0.008-0.011 in.) | |||
| Tappet To Valve Clearance - Exhaust | 0.27-0.33 mm (0.010-0.013 in.) | |||
| Tappet To Bore Clearance | 0.02-0.06 mm (0.0007-0.0023 in.) | |||
| Camshaft | ||||
| Lobe Lift - Intake | 8.24999 mm (0.324 in.) | |||
| Lobe Lift - Exhaust | 7.80007 mm (0.307 in.) | |||
| Runout (1) | 0.03 mm (0.001 in.) | |||
| Thrust Clearance | 0.09-0.24 mm (0.003-0.009 in.) | |||
| Journal Diameter | 24.96-24.98 mm (0.982-0.983 in.) | |||
| Journal To Bore Clearance | 0.035-0.080 mm (0.001-0.003 in.) | |||
| Connecting Rod | ||||
| Bearing Clearance | 0.027-0.052 (0.001-0.002 in.) | |||
| Bearing Thickness | 1.496-1.520 mm (0.058-0.059 in.) | |||
| Crank Bore Diameter | 53.025-53.045 mm (2.087-2.088 in.) | |||
| Pin Bore Diameter | 20.965-20.985 mm (0.825-0.826 in.) | |||
| Length (Center To Center) | 154.8 mm (6.094 in.) | |||
| Side Clearance | 1.95-3.05 mm (0.076-0.120 in.) | |||
| Axial Clearance | 0.14-0.36 mm (0.005-0.014 in.) | |||
|
||||
All dimensions are in mm unless noted.