Section 2 (Engine - 2.0L SPI): Specifications: Camshaft
WARNING: This page is about a different variant/trim than selected.
ENGINE - 2.0L SPI CAMSHAFT SPECIFICATION
| Item | Specification (mm) |
|---|---|
| Lobe lift intake | 6.23 |
| Lobe lift exhaust | 6.23 |
| Allowable lobe lift loss | 0.127 |
| Theoretical valve maximum lift intake | 10.28 |
| Theoretical valve maximum lift exhaust | 10.28 |
| End play | 0.02-0.20 |
| Service limit | 0.20 |
| Journal to cylinder head bearing surface clearance | 0.03335-0.0835 |
| Journal diameter standard | 45.7375-45.7625 |
| Runout limit | 0.127 (runout of center bearing relative to bearing nos. 1 and 5) |
| Out-of-round limit | 0.08 |
| Camshaft drive assembled gear face runout crankshaft | 0.65 |
| Camshaft drive assembled gear face runout camshaft | 0.275 |