LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2002 >> Focus SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 344 (Automatic Transmission) >> In-Vehicle Repair >> Transaxle Support Insulator >> Removal

Transaxle Support Insulator: Removal

WARNING: This page is about a different car, the 2002 Ford Windstar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the vehicle.
  2. Remove the LH wheel and tire. For additional information, refer to WHEELS & TIRES .
  3. Place the high lift transmission jack under the transaxle.
    Fig 1: Placing High Lift Transmission Jack Under Transaxle
    G02144679Courtesy of FORD MOTOR CO.
  4. Remove the engine and transaxle upper support insulator nut.
    Fig 2: Removing Engine And Transaxle Upper Support Insulator Nut
    G02144680Courtesy of FORD MOTOR CO.
  5. Remove the engine and transaxle upper support bracket bolts and bracket.
    Fig 3: Removing Engine And Transaxle Upper Support Bracket Bolts And Bracket
    G02144681Courtesy of FORD MOTOR CO.
  6. Remove the engine and transaxle upper support insulator bolts and insulator.
    Fig 4: Removing Engine And Transaxle Upper Support Insulator Bolts And Insulator
    G02144682Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals