LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2001 >> Explorer Chassis >> Repair and Diagnosis >> Steering >> Power Steering >> Power Rack & Pinion Steering System >> System Tests >> Pressure Test >> Pre-Test Preparation

Pre-Test Preparation

  1. With belt tension correct, disconnect power steering pump pressure hose. Keep hose end raised to prevent fluid loss. Connect Power Steering Analyzer (014-00207) to power steering pump high pressure hose with Power Steering Analyzer Fittings (014-0208). Connect other hose from valve side of analyzer to steering gear inlet.
  2. Open valve on power steering analyzer. Run engine until fluid reaches normal operating temperature of 122-140°F (50-60°C). Check fluid level. Add fluid as necessary. Ensure all air is removed from fluid.
scientia non olet · About LEMON Manuals