LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Power Windows) >> Removal & Installation >> Window Drive Motor >> Removal

Window Drive Motor: Removal

WARNING: This page is about a different car, the 1997 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise window to full up position (if possible) and support. Disconnect battery ground cable. Remove door trim panel and protective liner. Unplug drive motor harness connector.
  2. Using a 3/4" hole saw with a 1/4" pilot hole, drill out one dimple to access one of the motor mounting screws. Remove motor mounting screws. Pry drive motor away from regulator mounting plate. Remove drive motor.
scientia non olet · About LEMON Manuals