LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1997 >> Probe Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Automatic Transmission Servicing) >> Adjustments >> Shift Cable/Linkage

Shift Cable/Linkage

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1997 Mercury Grand Marquis, 1997 Mercury Cougar, 1997 Lincoln Town Car, 1997 Lincoln Mark VIII, and 1997 Ford Thunderbird. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position transmission shift lever in OVERDRIVE position. Hold shift lever against rear overdrive stop with a constant force of about 3 lbs. (1.4 kg). Loosen shift control cable retaining nut at transmission.
  2. Ensure manual control lever is in OVERDRIVE position. OVERDRIVE is second detent from rear most position. Tighten shift control cable retaining nut to 13-17 ft. lbs. (17-23 N.m).
  3. Check PARK engagement. Start engine and ensure transmission shifts through all gears. Verify vehicle only starts in PARK and NEUTRAL and backup lights work. If not, check transmission range sensor adjustment. See TRANSMISSION RANGE (TR) SENSOR/SWITCH  .
scientia non olet · About LEMON Manuals