LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1995 >> Crown Victoria Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Seats - Power) >> Pinpoint Tests >> Pinpoint Test B - FORWRD/REARWRD FNCTN Does Not Work Properly

Pinpoint Test B - FORWRD/REARWRD FNCTN Does Not Work Properly

WARNING: This page is about a different car, the 1995 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unplug seat motor connector. Using fused jumper wires, connect motor terminal No. 1 (Red/White wire) to battery voltage. Momentarily connect motor terminal No. 2 (Yellow/White wire) to ground. Seat should operate smoothly. Transpose jumper wires at connector. Seat should operate smoothly in opposite direction. Replace motor if operation is not as specified.
  2. Reconnect wiring to motor. Unplug switch connector. Using fused jumper wires, supply battery voltage to switch harness connector pin No. 1 (Red/White wire). Momentarily connect pin No. 2 (Yellow/White wire) to ground. Seat should move smoothly. Transpose jumper wires at connector. Seat should move smoothly in opposite direction. Repair appropriate wire if operation is not as specified. If seat moves as specified, test power seat switch. See SWITCH TEST under COMPONENT TESTING.
scientia non olet · About LEMON Manuals