Torque Specifications
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| Center Support Fluid Feed Bolts | 8-12 (11-16) | |
| Connector-To-Case Cooler Line Nut | 18-23 (24-31) | |
| Control Assembly-To-Pump Body Bolts | 18-23 (24-31) | |
| Converter Drain Plug | 18-20 (24-27) | |
| Extension Housing-To-Case | ||
| (2WD) Bolts | 20-29 (27-39) | |
| (4WD) Bolts | 24-40 (33-54) | |
| Inner One-Way Clutch Race-To-Case Bolts | 18-25 (24-34) | |
| Inner & Outer Lever-To-Manual Control Shift Nut | 30-40 (41-54) | |
| Manual Detent Lever Nut | 30-40 (41-54) | |
| Oil Pan-To-Case Bolts | 10-12 (14-16) | |
| Oil Pump Body-To-Case Bolts | 18-23 (24-31) | |
| Parking Pawl Abutment-To-Case Bolts | 16-20 (22-27) | |
| Parking Rod Guide Plate-To-Case Bolts | 16-20 (22-27) | |
| INCH Lbs. (N.m) | ||
| Center Support-To-Hub Bolts | ||
| Front Bolt | 72-120 (9-14) | |
| Rear Bolt | 96-144 (11-16) | |
| Lower Body-To-Main Body Bolts | 80-100 (9-11) | |
| Main Accumulator & Solenoid Body-To-Case Bolts | 80-100 (9-11) | |
| Main And Lower Body-To-Case Bolts | 80-100 (9-11) | |
| MLP Sensor-To-Case Bolts | 55-75 (6-8) | |
| Overdrive Cylinder Fluid Feed Bolts | 72-120 (8-14) | |
| Plug Line Pressure Case | 72-144 (8-16) | |
| Plug Throttle Pressure Case | 72-144 (8-16) | |
| Positive Detent Spring-To-Case Bolts | 80-100 (9-11) | |
| Reinforcing Plate-To-Case Bolts | 80-100 (9-11) | |
| Solenoid Body-To-Case Bolts | 80-100 (9-11) | |
| Stator Support-To-Pump Body Bolts | 80-100 (9-11) | |
| Valve Body-To-Case Long Stud | 80-100 (9-11) | |
| Valve Body-To-Case Nut | 80-100 (9-11) | |
| Valve Body-To-Case Short Stud | 80-100 (9-11) | |