LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Bronco 5.8 H >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - E4OD >> Torque Converter >> Stator Interference Check >> Stator-To-Impeller Interference Check

Stator-To-Impeller Interference Check

  1. Position stator support on bench with spline end of stator shaft pointing up. Mount converter on stator support so splines of one-way clutch inner race engage splines of stator support.
  2. While holding pump stationary, rotate converter counterclockwise. Converter should rotate freely without interference or scraping within assembly. Should interference or a scraping condition within converter exist or converter does not rotate freely, replace converter unit.
scientia non olet · About LEMON Manuals