LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1994 >> Bronco 5.8 H >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul - E4OD >> Testing >> Stall Speed Test >> Testing Precautions

Testing Precautions

  1. Engine coolant and transmission fluid MUST be at proper level and operating temperature. Hold accelerator down long enough to stabilize tachometer. DO NOT hold at WOT for more than 5 seconds.
  2. DO NOT exceed maximum specified RPM for vehicle. Before shifting into each selector position, run engine in Neutral at 1000 RPM for 2 minutes to cool transmission. If engine speed exceeds specification, release accelerator immediately, as this indicates clutch or band slippage.
scientia non olet · About LEMON Manuals