LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1991 >> Taurus SHO >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper/Washer System >> Testing >> Wiper Switch Continuity Specifications

Wiper Switch Continuity Specifications

WIPER SWITCH CONTINUITY TEST

Switch Position Terminal (Wire Color) Continuity
OFF All Terminals No
INT RED-To-DK GRN Yes
LOW RED-To-BRN/WHT Yes
HIGH RED-To-DK BLU/ORG Yes
" RED-To-BRN/WHT Yes
WASH RED-To-BLK/WHT Yes
INT YEL/RED-To-ORG (1)
(1) Rotate INT knob throughout range of adjustment. Resistance should vary (minimum 420-880 ohms, maximum 7000-13,000 ohms).
WIPER SWITCH CONTINUITY TEST

Switch Position Terminal (Wire Color) Continuity
OFF BRN/WHT-To-DKBLU/WHT 103.3
" BRN/WHT-To-ORG 47.6
WASH BRN/WHT-To-DK BLU 0 (Closed)
" BRN/WHT-To-ORG 47.6
LOW BRN/WHT-To-DK BLU/WHT 3.3
" BRN/WHT-To-ORG 4.08
HIGH BRN/WHT-To-DK BLU 3.3
" BRN/WHT-To-ORG 0 (Closed)
INTERVAL BRN/WHT-To-ORG (1) 11.33
(1) By rotating the INTERVAL knob through range of adjustment from minimum to maximum, resistance between the BRN/WHT wire terminal and the DK BLU/WHT wire terminal should gradually increase from 3.3 k/ohms to 103.3 k/ohms. All test measurements should be within 10% of specifications given above.
scientia non olet · About LEMON Manuals