LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 1984 >> Bronco 5.8 H >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Testing >> Speed Sensor

Speed Sensor

  1. Disconnect 6-way connector at amplifier, and connect an ohmmeter between wire connector terminals (Dark Green dashed and Black on Van models, Dark Green/White dashed and Black on all other models) at speed sensor end. A reading of about 40 ohms should be obtained.
  2. A reading of 0 ohms indicates a shorted coil. A maximum reading indicates an open coil. Replace sensor in either case. If reading is 40 ohms and speedometer operates properly, speed sensor is probably good. A speed sensor of known quality can be substituted in place of existing sensor to check proper operation.
scientia non olet · About LEMON Manuals