LEMON Manuals: Even more car manuals for everyone
Home >> Fiat >> 2019 >> 500X Pop >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> Sensor, Crankshaft Position >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. Install the crankshaft position sensor and tighten the screw (2) to the proper specification. Refer to FUEL INJECTION, TECHNICAL SPECIFICATIONS .
  2. Connect the wire harness connection (1) to the crankshaft position sensor.
  3. Install the starter. Refer to STARTER, INSTALLATION .
GC0186986Courtesy of CHRYSLER GROUP, LLC
scientia non olet · About LEMON Manuals