LEMON Manuals: Even more car manuals for everyone
Home >> Dodge and Ram >> 2021 >> ProMaster City Base >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Body Control (BCM) >> Removal And Installation >> Installation

Removal And Installation: Installation

GC0171089Courtesy of CHRYSLER GROUP, LLC
  1. From under the driver side of the instrument panel, connect the wire harness connectors to the back side of the BCM (4).
  2. Install the upper fasteners (3) loosely.
  3. Connect the wire harness connectors (5) to the BCM.
  4. Install the fuse junction block (2) and tighten the fasteners (1) securely.
  5. Install the wire harness bracket (8) and tighten the fasteners (7) securely.
  6. Install the fasteners (6) and tighten securely.
  7. Install the steering column opening cover. Refer to COVER, STEERING COLUMN OPENING, REMOVAL AND INSTALLATION .
  8. Connect the negative battery cable.
scientia non olet · About LEMON Manuals